Manuals / Paradyne / Computer Equipment / Network Router

Paradyne 4800 Express manual Connecting a Modem to the Console Port, Procedure

Models: 4800 Express

1 52

Download 52 pages 57.01 Kb

Page 28

Connecting a Modem to the Console Port

2. Cabling

Connecting a Modem to the Console Port

Procedure

To connect a modem to the CONSOLE port:

1.Determine and procure the proper DCE cable type for your modem. The CONSOLE port requires a DB9 plug connector. The other connector depends on the serial port on your modem, but normally a DB25 plug is required. The cable must be an EIA-232-E crossover (null modem) cable.

2.Connect the DB9 plug connector to the CONSOLE port socket.

3.If the modem will be permanently connected, fasten the connector to the Management Module with its captive screws. If the BitStorm 4800 Express is in a rack, dress the cable to the left and attach it to the rail with a cable tie.

4.Connect the other end of the cable to the serial port of your modem.

Serial Port

Modem

PWR	ALM TST
	ALM TST
	LINE	ETHERNET
		ETHERNET

CONSOLE	PORT1	PORT2
	10/100BT	PORT2
		10/100BT

STATUS	ALARM	TEST
		1

2

3	5	7	9

4

6

8

10

11	13	15	17	19
			17	19	21	23
					21	23

12	14	16	18	20
					22	24

25	27	29	31	33	35
		29	31	33	35	37	39
						37	39	41	43	45	47
26								41	43	45	47
26	28	30	32	34	36
				34	36	38	40	42	44
								42	44	46	48
										46	48

DSL PORTS 1-24

	CONSOLE	04-17531
	Port	04-17531
	Port

2-6

July 2004

4821-A2-GN21-10

Image 28

Paradyne 4800 Express manual Connecting a Modem to the Console Port, Procedure

Contents

Model 4821-A2 Installation Guide BitStorm 4800 ExpressDocument No. 4821-A2-GN21-10 JulyWarranty, Sales, Service, and Training Information Copyright 2004 Paradyne Corporation All rights reservedPrinted in U.S.A Document FeedbackSoftware and Firmware License Agreement Important Safety Instructions EMI Notices UNITED STATES - EMI NOTICE CANADA - EMI NOTICECE Marking Notices to Users of the Canadian Telephone NetworkJapan Contents 1 InstallationAbout This Guide 2 CablingA Connectors and Pin Assignments 4 ConfigurationB Equipment List C Technical Specifications Index About This Guide Document Purpose and Intended AudienceDocument Summary Chapter 1, InstallationRelated Product Documents Document NumberDocument Title 4821-A2-GB21Installation Table 1-1. BitStorm 4800 Express Models and FeaturesOverview Model Number„ Installation Site „ Installation Options„ Power PreparationConnector Name Connector and CableFor Connecting Cables RequiredHANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES Package ContentsUnpacking the Hardware Description AppearanceQuantity Mounting Configurations ProcedureInstalling the Brackets for Rack Mounting Three basic installation configurations are available23-inch 584 mm EIA and Bay Networks 23-inch 584 mm NortelInstalling the BitStorm 4800 Express Into a Rack ProcedureALARM 04-17526CONSOLE DSL PORTS DSL PORTS1-10 Installing the BitStorm 4800 Express on a WallProcedure 1-11 17.85 in 453 mm1-12 Installing the BitStorm 4800 Express on a Shelf or DesktopProcedure „ 10/100BaseT Uplink Port 2 on page „ Management Port on page „ Connecting to Power on pageCabling Cabling OverviewDSL Ports Procedure10/100BaseT Uplink Port ProcedureManagement Port ProcedureEthernet Switch PortConsole Port Connecting a Terminal or PC to the Console PortProcedure Connecting a Modem to the Console Port ProcedureGround Procedure2. Remove the screw marked by the ground symbol 3. Fasten the ring terminal to the front panel using the same screwConnecting to Power ProcedureLEDs LED LocationsFigure 3-1. Front Panel LEDs PORT1 PORT2 CONSOLE 10/100BT 10/100BT TEST ALARMLED Meanings Table 3-1. Front Panel LEDsColor StateConfiguration OverviewUsing the CLI Configure Management Default Gateway AddressTable 4-1. CLI Commands CommandConfigure Management Inband Address Configure Management Out-of-Band Addressconfigure management inband address ipaddress subnetmask PDYN# configure management inband address 137.90.127.3BitStorm 4800 Express Startup Procedure LoginManagement Modes ProcedureStartup Procedure for Inband Management Startup Procedure for Out-of-Band ManagementProcedure ProcedureUsing the Web Interface ProcedureSystem / Users ProcedureConfiguration / Management / SNMP ProcedureConnectors and Pin Assignments „ DSL Ports Connectors on page A-2„ Port 1 and Port 2 10/100BaseT Connectors on page A-3 „ Console Port Connector on page A-4DSL Ports Connectors Table A-1. DSL Connector PinoutsConnector Pins DSL PortSignal Port 1 and Port 2 10/100BaseT ConnectorsTable A-2. Port 1 and Port 2 Pinouts Console Port Connector Table A-3. Console Port ConnectorRS-232 Signal DirectionEquipment List Table B-1. BitStorm 4800 Express Equipment ListDescription Model NumberJuly B. Equipment List4821-A2-GN21-10 Technical Specifications Table C-1. BitStorm 4800 Express Technical SpecificationsSpecifications CriteriaJuly C. Technical Specifications4821-A2-GN21-10 Numerics IndexIN-1 Page IN-3 IN-4 IndexJuly 4821-A2-GN21-10