Manuals / Paradyne / Computer Equipment / Network Router

Paradyne 4800 Express Ground, Procedure, To connect the unit to a ground, front panel, 04-17532

Models: 4800 Express

1 52

Download 52 pages 57.01 Kb

Page 29

Image 29

2. Cabling

Ground

Procedure

To connect the unit to a ground:

1.Crimp a ring terminal onto the stripped end of 14 AWG or heavier copper ground wire.

2. Remove the screw marked by the ground symbol (	) at the right side of the
front panel.

3.Fasten the ring terminal to the front panel using the same screw.

4.Attach the ground wire to an earth ground.

To Earth Ground

04-17532

4821-A2-GN21-10

July 2004

2-7

Page 29

Image 29

Paradyne 4800 Express Ground, Procedure, To connect the unit to a ground, Remove the screw marked by the ground symbol

Contents

BitStorm 4800 Express Model 4821-A2 Installation GuideDocument No. 4821-A2-GN21-10 JulyCopyright 2004 Paradyne Corporation All rights reserved Warranty, Sales, Service, and Training InformationPrinted in U.S.A Document FeedbackSoftware and Firmware License Agreement Important Safety Instructions CANADA - EMI NOTICE EMI Notices UNITED STATES - EMI NOTICEJapan Notices to Users of the Canadian Telephone NetworkCE Marking 1 Installation ContentsAbout This Guide 2 CablingB Equipment List C Technical Specifications Index 4 ConfigurationA Connectors and Pin Assignments Document Purpose and Intended Audience About This GuideDocument Summary Chapter 1, InstallationDocument Number Related Product DocumentsDocument Title 4821-A2-GB21Table 1-1. BitStorm 4800 Express Models and Features InstallationOverview Model Number„ Installation Options „ Installation Site„ Power PreparationConnector and Cable Connector NameFor Connecting Cables RequiredUnpacking the Hardware Package ContentsHANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES Quantity AppearanceDescription Procedure Mounting ConfigurationsInstalling the Brackets for Rack Mounting Three basic installation configurations are available23-inch 584 mm Nortel 23-inch 584 mm EIA and Bay NetworksProcedure Installing the BitStorm 4800 Express Into a Rack04-17526 ALARMCONSOLE DSL PORTS DSL PORTSProcedure Installing the BitStorm 4800 Express on a Wall1-10 17.85 in 453 mm 1-11Procedure Installing the BitStorm 4800 Express on a Shelf or Desktop1-12 „ Connecting to Power on page „ 10/100BaseT Uplink Port 2 on page „ Management Port on pageCabling Cabling OverviewProcedure DSL PortsProcedure 10/100BaseT Uplink PortProcedure Management PortEthernet Switch PortProcedure Connecting a Terminal or PC to the Console PortConsole Port Procedure Connecting a Modem to the Console PortProcedure Ground2. Remove the screw marked by the ground symbol 3. Fasten the ring terminal to the front panel using the same screwProcedure Connecting to PowerLED Locations LEDsFigure 3-1. Front Panel LEDs PORT1 PORT2 CONSOLE 10/100BT 10/100BT TEST ALARMTable 3-1. Front Panel LEDs LED MeaningsColor StateOverview ConfigurationConfigure Management Default Gateway Address Using the CLITable 4-1. CLI Commands CommandConfigure Management Out-of-Band Address Configure Management Inband Addressconfigure management inband address ipaddress subnetmask PDYN# configure management inband address 137.90.127.3Login BitStorm 4800 Express Startup ProcedureManagement Modes ProcedureStartup Procedure for Out-of-Band Management Startup Procedure for Inband ManagementProcedure ProcedureProcedure Using the Web InterfaceProcedure System / UsersProcedure Configuration / Management / SNMP„ DSL Ports Connectors on page A-2 Connectors and Pin Assignments„ Port 1 and Port 2 10/100BaseT Connectors on page A-3 „ Console Port Connector on page A-4Table A-1. DSL Connector Pinouts DSL Ports ConnectorsConnector Pins DSL PortTable A-2. Port 1 and Port 2 Pinouts Port 1 and Port 2 10/100BaseT ConnectorsSignal Table A-3. Console Port Connector Console Port ConnectorRS-232 Signal DirectionTable B-1. BitStorm 4800 Express Equipment List Equipment ListDescription Model Number4821-A2-GN21-10 B. Equipment ListJuly Table C-1. BitStorm 4800 Express Technical Specifications Technical SpecificationsSpecifications Criteria4821-A2-GN21-10 C. Technical SpecificationsJuly IN-1 IndexNumerics Page IN-3 Index IN-4July 4821-A2-GN21-10

Ground

To connect the unit to a ground:

2. Remove the screw marked by the ground symbol (

) at the right side of the

front panel.

3.Fasten the ring terminal to the front panel using the same screw.

4.Attach the ground wire to an earth ground.

To Earth Ground

04-17532