![](/images/new-backgrounds/1142741/14274131x1.webp)
Workstation Settings
Choosing the Active Server
Use Active Server... to choose the active server for the NMS client. After you choose an active server with this command, the NMS client uses the IP address you set up using NMS Servers... to communicate with that server.
.Procedure
1.Select Workstation from the Main Menu.
2.Choose Active Server.... The Active Server dialog box appears, as shown in Figure
Figure 2-2. Active Server Dialog Box
3.Select a server from the Available NMS Servers listbox.
4.Choose OK. The Main Menu appears.
NOTE:
If you change the NMS server while the NMS is active, you must restart NMS.