Paradyne 916x, 926x Setting Date and Time, Configuring the T1 Access Unit

Setting Up
5-4 9161-A2-GH30-30
April 1998
Setting Date and Time
Use the Date & Time screen to set the date and time for the system.
"Procedure
1. Follow this menu selection sequence:
Main Menu → Control → Date & Time
2. Use the Tab key to move the cursor to the field where you want to add or
change information.
NOTE:
To clear existing information, move the cursor to the Clear field and press
Return.
If the selection is . . . Enter the . . .
Date (mm/dd/yy) Date in the format mm/dd/yy or mm-dd-yy.
Time (hh:mm) Time (24-hour clock) in the format hh:mm.
3. To save changes, select Save and press Return.
When Save is complete, Command Complete appears in the message area
at the bottom of the screen.
Configuring the T1 Access Unit
Your system comes preconfigured with factory default settings as noted in the
configuration option tables in this chapter, as well as on the Quick Reference. If
you need to display or change these settings, use the system’s Configuration
branch.
To change configuration option settings you must perform the following tasks:
HAccess and display configuration option settings
HChange configuration option settings
HSave configurations option settings to a configuration option area
NOTE:
Only Security Access Level 1 users can change configuration options.
Security Access Level 2 and 3 users can just view configuration options.