Paradyne 916x, 926x Assigning Voice Ports to DSX-1 or Network Interface Timeslots, Assigning Sync Data Ports

Setting Up
5-44 9161-A2-GH30-30
April 1998
Assigning Voice Ports to DSX-1 or Network Interface Timeslots
Use the Voice Port Assignments screen to view the status of all DS0 assignments
on the Network or DSX-1 interface. You can also use this screen to assign voice
ports to selected timeslots.
NOTE:
You can assign voice ports to the DSX-1 interface on the 9161 Single T1
NAM. Voice port assignments on the Dual DSX APM are not supported.
"Procedure
1. Follow this menu selection sequence:
Configuration Edit/Display → Cross Connect → Voice Port Assignment
2. The Cross Connect menu appears. Select Voice Port Assignment and press
Return. The Voice Port Assignments screen appears.
3. Enter Net1, Net2, or DSX01-1 into the Assign To field to assign voice ports to
the Network 1, Network 2, or DSX-1 interface, respectively.
4. Move the cursor to the next editable timeslot (underlined). Use the spacebar
or type in the desired slot and port. Repeat this step until all desired timeslots
are assigned.
5. Select Save to save the assignments, or press ESC to save and return to the
Cross Connect menu.
Assigning Sync Data Ports
Use the Sync Data Port Assignments screen to view the status of
HAll DS0 assignments on the Network interface
HAll DS0 assignments on the DSX-1 interface
HA port-to-port assignment
You can also use this screen to assign synchronous data ports to
HNetwork interface timeslots
HDSX-1 interface timeslots
NOTE:
You can assign sync data ports to the DSX-1 interface on the 9161 Single
T1 NAM. Sync data port assignments on the Dual DSX APM are not
supported.
HAnother synchronous data port
NOTE:
Only one port-to-port assignment is allowed, with a maximum of 24 DS0s
for 9161 Single T1 NAM, 16 DS0s for 9261 Dual T1 NAM.