Paradyne 916x, 926x manual 7-25

Displaying System Information
7-25
9161-A2-GH30-30 April 1998
Table 7-4. Test Status Messages (2 of 2)
Message What It Indicates
OCU DS-0 LB, Slot ss
Port p
An DS0 Loopback test is on the OCU-DP interface in
slot ss , port p .
Voice DLB, Slot ss Port p A voice Digital Loopback (DLB) test is active on slot ss ,
port p.
Voice ALB, Slot ss Port p A voice Analog Loopback (ALB) is active on slot ss , port p.
Voice LLB, Slot ss Port p A voice Line Loopback (LLB) test is active on slot ss ,
port p.
Voice DRS, Slot ss Port p A voice Digital Reference (DRS) test is active on slot ss ,
port p.
Voice Quiet, Slot ss Port p A voice quiet tone test is active on slot ss , port p.
Forced Signal, Slot ss
Port p
A forced signaling test is active on slot ss , port p.
Pttn Active, [Network n ] A pttn test (test patterns for Network 1 or Network 2 ) is
active on Network
n.
Pttn Active, [DSX ss-p ] A pttn test (test patterns for the DSX-1 interface in slot ss ,
port
p ) is active .
Pttn Active, [Slot ss Port p ] A pttn test (test patterns for Sync Data port) is active on
slot ss , port p.
Mon Pttn , [Network n ]A Monitor pttn (test patterns for the Network 1 or
Network 2) is active on Network n.
Mon Pttn , [DSX ss-p ]A Monitor pttn (test patterns for the DSX-1 interface in
slot
ss , port p ) is active .
Mon Pttn , [Slot ss Port p ]A Monitor pttn (test patterns for the Sync Data port) is
active on slot ss , port p.
Lamp Test Active The Lamp Test is active, causing all LEDs on the T1 NAM
and APMs to blink.