Paradyne 9128-II, SLV 9128 technical manual Modifying Isdn Link Profiles Procedure

Modifying ISDN Link Profiles

Procedure

1.Select Link Profiles, then Modify.

The FrameSaver unit automatically configures an ISDN Link Profile on the first ISDN link, with HQ_Site as the Link Name. For subsequent ISDN Link Profiles, select New.

2.Add a name and phone number to the ISDN Link Profile(s) created by Automatic Backup Configuration.

—Name for the destination entered (e.g., Tampa). The default setting is HQ_Site.

—Phone numbers entered:

For Originating a Backup Call	For Answering a Backup Call
Outbound and Alternate Outbound phone numbers	Inbound Calling ID1 and ID2
Valid characters include:	hese are the phone numbers of
Numbers (0–9)	units from which calls will be
	accepted.
Special characters * and #
Spaces	ValidT	characters include:
TParentheses ( )	Numbers (0–9)
Transmit Timing

NOTES:

Remember to include local dial-out numbers (i.e., 9, then the number).

For every originating (outbound) phone number entered, an answering (inbound) phone number must be entered at the far end, and vice versa.

— Maximum Link Rate is changed, if necessary. The default setting is 64 Kbps.

3.Save the configuration.

Setting the Criteria for Automatic Backup

Procedure

1.Enable Auto Backup.

Main Menu → Configuration → Auto Backup Criteria

When a failure occurs, the unit automatically enables the Alternate Link and traffic is rerouted over the backup (alternate) interface.

2.Specify When Auto Backup Allowed – Always or Restrict. If Restrict is selected, specify the days and hours of the week during which automatic backup can take place.

3.Save the configuration.

17