7.General purpose cables are provided with this product. A UL Listed/CSA Certified, minimum No. 26 AWG, telecommunications cable is provided for connection to the network. Use this cable to reduce the risk of fire.

Special cables, which may be required by the regulatory inspection authority for the installation site, are the responsibility of the customer.

8.When installed in the final configuration, the product must comply with the applicable Safety Standards and regulatory requirements of the country in which it is installed. If necessary, consult with the appropriate regulatory agencies and inspection authorities to ensure compliance.

9.A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If products installed in separate buildings are interconnected, the voltage potential may cause a hazardous condition. Consult a qualified electrical consultant to determine whether or not this phenomenon exists and, if necessary, implement corrective action prior to interconnecting the products.

10.In addition, if the equipment is to be used with telecommunications circuits, take the following precautions:

—Never install telephone wiring during a lightning storm.

—Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

—Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

—Use caution when installing or modifying telephone lines.

—Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

—Do not use the telephone to report a gas leak in the vicinity of the leak.

11.To reduce the risk of fire, this component card cage must be installed in a suitable Electrical and Fire Enclosure that complies with enclosure, mounting, casualty and segregation requirements of the end-use product. Openings located within the enclosure must be separated from any network-connected component by a minimum of 25 millimeters of air when measured in any dimension, unless the openings are 5 millimeters or less, or measure one millimeter in length, regardless of the width.

28

Page 27 Page 29
Page 28
Image 28
Paradyne SLV 9128, 9128-II technical manual
Page 27 Page 29

9128-II, SLV 9128 specifications

Paradyne's FrameSaver SLV 9128 is a robust solution designed to meet the increasing demands of telecommunications, providing both reliability and efficiency for businesses that require a seamless transmission of data across various networks. This high-performance networking device stands out for its versatile functionality and innovation in managing Frame Relay and ATM services.

One of the defining features of the FrameSaver SLV 9128 is its ability to support integrated DSO multiplexing. This allows users to efficiently combine multiple digital signals over a single connection, optimizing bandwidth usage while ensuring high-quality voice and data transmission. The device is designed to effectively handle a variety of traffic types, making it ideal for companies that utilize mixed communications systems.

In terms of connectivity, the SLV 9128 includes a range of interfaces that cater to different network architectures. Support for T1/E1 lines enables the device to easily integrate into existing infrastructures. The incorporation of both serial and Ethernet interfaces adds flexibility, accommodating diverse networking environments and making it easier to connect with various end devices.

The FrameSaver SLV 9128 is equipped with advanced traffic management capabilities. Its features include dynamic bandwidth allocation and prioritization of critical voice or data traffic, allowing businesses to optimize their network performance based on real-time demands. This capability is particularly beneficial for organizations that rely heavily on VoIP services, as it helps to ensure clear voice quality even during peak usage times.

Security is paramount in communication technologies, and the SLV 9128 does not disappoint in this area. It incorporates encryption protocols and secure authentication methods to safeguard data transmission against unauthorized access. This ensures that sensitive information remains protected as it traverses the network.

The device also boasts a user-friendly interface for easy configuration and management. Network administrators can monitor performance metrics, troubleshoot issues, and adjust settings with minimal effort, leading to reduced downtime and enhanced operational efficiency.

In summary, the Paradyne FrameSaver SLV 9128 combines powerful features, advanced technologies, and flexible connectivity options to deliver a reliable and efficient networking solution. Its traffic management capabilities, robust security measures, and ease of use make it an ideal choice for businesses seeking to enhance their telecommunications infrastructure and improve network performance. With the SLV 9128, organizations can confidently support their growing communication needs while ensuring high-quality service delivery.
Top Page Image Contents