Patton electronic 1082, 144, I user manual General Information, Features

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics Technical Support at (301) 975-1007.

2.1 FEATURES

•Provides MAC Level Data Link (Layer 2) connection between two peered 10Base-T Ethernet LANs

•Operates transparently to higher level protocols such as TCP/IP, DEC- net, NETBIOS and IPX

•PPP (Point to Point Protocol, RFC 1661) with Bridge Control Protocol (RFC 1638)

•Automatically learns, loads and removes MAC addresses

•Point-to-point distances up to 5 miles (all data rates) on 24 AWG twisted pair

•HTTP/SNMP Manageable as CP (Customer Premises) Unit with 1092ARC CO (Central Office) Rack Card and 1001MC management card

•Internal or receive recovered clocking between units

•LED indicators for 10Base-T Link, DSL Link, Status, No Signal, Error and Test Mode

•Remote digital loopback, local line loopback diagnostic modes

•Synchronous data rates: 19.2, 32, 56, 64, 128, and 144 kbps

Note 144 kbps data rate is only available on the Model 1082/144/I.

19.2kbps rate is available on all Model 1082 series modems except for the 1082/144/I.

•Full duplex operation over a single twisted pair (2-wires)

•Multi-Rate Symmetric DSL

•Compatible with the popular Patton Model 1092A

•Universal power supply (90–260VAC) or DC power supply (-48VDC)

•Small, Convienent Desktop Unit

•CE Marked

6