Model 3034/3038 Getting Started Guide | 3 • Model 3034/3038 installation |
|
|
Internal AC Power Supply.
•Do not connect power to the AC Mains at this time.
• There are no
WARNING tion of the Model 3034/3038. Contact Patton Electronics Technical support at
•The internal power supply automatically adjusts to accept an input voltage from 100 to 240 VAC (50/60 Hz).
Verify that the proper voltage is present before plugging the power cord into the receptacle. Failure to do so could result in equipment damage.
1.Connect the AC power cord female plug directly to the AC connector.
2.Connect the AC power cord male plug to an AC power outlet
The Power LED blinks as the unit is powering up. When the Power LED stops blinking and remains lit, the unit is ready for user configuration. (See figure 3 on page 18).
External AC Power Supply.
•Do not connect power to the AC Mains at this time.
•The external power adapter shall be a listed Limited Power
WCAUTIONRNING Source.
•There are no
•The 3034/3038 external power supply automatically adjusts to accept an input voltage from 100 to 240 VAC (50/60 Hz). Verify that the proper voltage is present before plugging the power cord into the receptacle. Failure to do so could result in equipment damage.
An LPS 120/240V AC to 5VDC adapter is supplied with the EUI version of the Model 3034/3038.
1.The female plug on the AC power cord plugs into the male AC connector on the adapter.
2.Connect the AC power cord male plug to an AC power outlet
The Power LED blinks as the unit is powering up. When the Power LED stops blinking and remains lit, the unit is ready for user configuration. (See figure 3 on page 18).
Installing the Model 3034/3038 | 27 |