Patton electronic 3034/3038 Example - show controller sync-serial command, Stat Mux- CLI Commands

TrinityAE Administrator’s Reference Guide 6 • Sync Serial Configuration

Command Line Interface (CLI)

Table 8. Stat Mux- CLI Commands

Step	Explanation
configure controller sync-serial	Enter the sync-serial interface configuration mode.
clock	Set the parameters.
clock invert	Invert the clock signal.
clock rate <4K-7168K>	Set the generated clock sample rate in the range from 4K to
	7168K (DCE interface only).
[no] shutdown	Enable or disable the sync-serial interface.
status	Display the status and configuration of the sync-serial interface.
show controller sync-serial	Display the status and configuration of the sync-serial interface.

Example – show controller sync-serial command:

V.35 DTE Serial Device Status

CD:OFF

CTS: OFF

DSR: OFF

DTR: ON

RTS: OFF

Clock Invert: False

Enabled: False

Command Line Interface (CLI) 39