Paxar 6035 manual B e l S i z e s, Printer allows you to print the following label sizes

Proportionally	Font with variable character spacing – all characters have
spaced font	different widths. For example, an “i” versus a “w.”
	Proportionally spaced fonts include CG Triumvirate, CG
	Triumvirate Condensed, and CG Triumvirate Bold.
Quiet Zone	An area of white space required at the beginning and end of
	a bar code to allow scanning. Also at the beginning/end and
	edges of a label. Also know as non-print zone.
Segment line type	A line type with a starting point and an end point.
Start/stop	Distinct characters used at the beginning and end of each
character	bar code symbol that provides initial timing references and
	indicates the direction of scanning.
Variable length	A bar code of variable character length: I2 of 5, Code 39,
bar code	Codabar, Code 128, MSI, PostNet, and Code 93.
Vector line type	A line type with a starting point, angle, and length of line.
Vertical bar code	Data that is rotated and prints down the length of a label.
or text
Void	Light area on a label in a bar code or text.

L a b e l S i z e s

The printer allows you to print the following label sizes.

Supported Supply		Supported Supply Lengths:
Widths:		.55	inches
1.20	Inches	.785 inches
1.50	Inches	1.1	inches
2.00	Inches	1.5	inches
		2.0	inches
		3.0	inches
		4.0	inches

NOTE: Most of the sample formats in this manual use 2” X 2” labels unless indicated otherwise.

Call 1-800-543-6650for more information about the various label sizes and label types available with this printer.

Introduction 1-3