Paxar 6035 manual O u t T e x t F i e l d s, Format Name, Format Number, Supply Length

D E F I N I N G T E X T F I E L D S 5

Create a separate definition for each text field. There are two types of text fields:

Simple	Contains data entered specifically for that field.
Combo	Contains data pulled from up to 10 other fields.
(combination)

NOTE: If text falls on two lines, each line of text requires a separate definition.

All samples shown in this chapter are created using 2.0-inch long by 2.0-inch wide supplies.

A b o u t T e x t F i e l d s

Read the following information to become familiar with the prompts for text fields. Valid ranges for the prompts are listed as well as information about using text fields.

Format Name	Depending on your printer’s configuration, enter a name for
	the format. For more information about your printer’s
	configuration, see Chapter 3, “Configuring the Printer.” The
	maximum number of characters for the format name is 16.
Format Number	Reserved for future use. (Depending on your printer’s
	configuration, enter a number for the format. The format
	number range is 1 – 99.)
Format	Reserved for future use. (Depending on your printer’s
Description	configuration, enter a description for the format.)
Supply Length	The length of your loaded supply. Measure from the top of
	one black mark to the top of the next black mark. The
	standard supply lengths are: 55, 78, 110, 150, 200, 300, or
	400 inches.

Defining Text Fields 5-1