7.Clean the
Black Mark
Sensor
Sensor
8.Reload the supply.
9.Close the supply door until the release buttons click into place.
10.Turn on the printer by pressing and holding P until the display appears.
Clearing Label Jams
When you are printing and jam occurs, a supply error message appears. To clear the jam:
1.Turn off the printer by pressing and holding P until the display is blank.
2.Push down on the release buttons on both sides of the printer to open the supply door. The supply door should swing open.
3.If necessary, remove the roll of supplies.
4.Remove the jammed supplies and reload the supply.
5.Close the supply door.
6.Turn on the printer by pressing and holding P until the display appears.
