Problem | Solution |
|
|
Supply does | Check the |
not calibrate | cut, or |
properly. | System Administrator's Guide for more |
| information. You may need a new sensor. |
Common Errors
The following is a list of common printer errors you may receive. If you receive a message not listed here, see your System Administrator or call the Service at the number listed on the back of this manual.
Error |
| Description |
|
|
|
025 |
| String length is outside the range 0 to |
Invalid Length |
| 2710. |
101 |
| The format referenced by batch is not |
Invalid/Missing |
| in memory. |
409 |
| The printer memory is full. Delete |
Memory Full |
| unnecessary formats or graphics from |
|
| memory. |
410 |
| Parity mismatch. Check your parity |
Parity |
| settings at the printer and at the host. |
411 |
| Framing error (baud rate mismatch). |
Framing |
| Check your baud rate settings at the |
|
| printer and at the host. |
413 |
| Online receive queue is full. Check for |
Overrun |
| a flow control problem. |
611 |
| Font, bar code, or density in the batch |
Error Loading |
| does not fit the format. |
612 |
| The data in this line of the batch is |
Invalid Data |
| missing or does not match the format. |
613 |
| Reference point off supply. |
Invalid Data |
|
|
| ||
