Use any of the following items to clean the printhead:
♦A soft cloth moistened with isopropyl alcohol.
CAUTION
Use isopropyl alcohol on the interior areas only, never on the exterior.
♦A Monarch Cleaning Pen (part number 114226).
To clean the printhead, platen roller, and supply sensors:
1.Turn off the printer by pressing and holding P until the display is blank.
Note: Do not use sharp objects to remove adhesive or label particles from the printhead area.
2.Push down on the release buttons on both sides of the printer to open the supply door. The supply door should swing open.
Release
Button
