55.PFL Interconnect: This 1/4" jack is an extension to the PFL bus allowing you to extend the PFL function to another console. Connecting the PFL Interconnect and Monitor Send Aux Inputs to the PFL Interconnect and Send (Send/Return) from each Monitor Send of an identical SRM doubles the consoles input capability while maintaining the PFL capabilities of both boards. See diagram below. The 1/4" jack is wired Tip=PFL signal/Sleeve=PFL control bus.

56.Intercom In/Out: Female XLR (in) and Male XLR (out) used to connect to a standard ClearComcompatible intercom line.

NOTE: Power supply voltage is not provided from the console to the intercom line.

57.Intercom 4-Pin XLR: Standard 4-Pin XLR connector used to connect the operators headset (microphone/headphones).

14

Page 14
Image 14
Peavey SRM Series owner manual