p. 18
group output module—matrix, aux, group
mono-matrix features
This section is intended for use in Front of House operations to provide
a matrixed mix to dedicated locations. When the console is being used for
monitor mixing operations, this section can be used as a matrixed mix to
feed generic mixes to various stage locations. When teamed with an
external patch from an input module’s direct output connector to the
external input of the matrix module, a customized mix can be generated
for supporting artists such as horn or background vocal sections. This is
accomplished by mixing the artists individual microphone with up to 11
generic analog group mixes.
MATRIX OUTPUT CONNECTOR - XLR Balanced—on rear-panel.
INSERT SEND AND RETURN MATRIX CONNECTORS - SEPARATE
1/4” Balanced Send and Return connectors—on rear-panel.
EXTERNAL MATRIX INPUT CONNECTOR - XLR Balanced—on rear-
panel.
left to matrix
Controls the amount of Left signal fed to the matrix output. Signal is
sourced pre or post fader as determined by a Pre/Post switch within the
master fader bay located next to Left/Right/Mono output faders.
right to matrix
Controls the amount of Right signal fed to the matrix output. Signal is
sourced pre or post fader as determined by a Pre/Post switch within the
master fader bay located next to Left/Right/Mono output faders.
mono to matrix
Controls the amount of Mono signal fed to the matrix output. Signal is
sourced pre or post fader as determined by a Pre/Post switch within the
master fader bay located next to Left/Right/Mono output faders.
group 1 to matrix
Controls the amount of Group 1 signal fed to the matrix output. Signal is
sourced pre or post level control as determined by Pre/Post s witch locat-
ed within each of the Group’s assignment sections.
group 2,3, 4, 5, 6, 7, 8 to matrix
Same as Group 1 above for each of the remaining groups.