p. 23
group output module—matrix, aux, group
aux master features
solo switch
Will illuminate when manually selected in one of the consoles many Solo
modes. Controls within the master section determine if this switch will
sample signal pre or post level control.
Additional switches will determine the operating characteristics of the
Solo system. These may be selected from within the master section to be
NORMAL (cumulative),LAST PRESSED (Only one switch will be on at a
time.Selecting the next solo switch will automatically cancel the last switch
selected) or MOMENTARY (Solo system on only while switch is held
down). This Solo switch will also Solo and illuminate automatically if the
VCA master group that the channel may be assigned to is put into SOLO.
The SOLO system displays selected channels on individual Solo Left and
Solo Right meters. The signal also appears on separate Headphone and
Monitor output channels. The solo signal may also be routed to the
Alternate A/B and C/D outputs within the master section.
talkback preset-switch
When selected will allow the Master Talkback Switch and system to access
this particular output.

output level-control (rotary pot)

Adjust the output level of this section,with a normal default as Aux Out

AUX-master and GRP-master LED indicators

Indicates the operation of this set of controls within this middle output
section. When the AUX MASTER LED (yellow) is illuminated,ALL of the
controls within this Middle Control Section will affect the AUX output. If
the GRP MASTER LED (green) is illuminated (Only one will be illuminat-
ed),ALL of the controls within this Upper Control Section will affect the
group output and feed to the Group Assignment section.
write-on strip
Will provide a number for this group output as well as providing a write
in area for the customer or a mounting surface for the customers mask-
ing tape labeling.