direct output features
This section is intended for use in Front of House operations to provide
a controlled feed of the modules separate left and right signals to an exter-
nal tape machine. It may also be used as a localized effects send or moni-
tor output. When the console is being used for monitor mix operations,
this output can be used as a dedicated send to the Matrix section to gen-
erate custom versions of the Matrix mix for monitor use.
DIRECT OUTPUT CONNECTORS - Separate Left and Right XLR
Balanced Outputs—on module rear-panel.

mode switch

When not depressed,all controls within this block affect the direct output
connectors. When depressed,all front panel controls within this section
affect the Balance and assignment section of the console.

FDR pre switch

Selects the signal sources of this section from its normal post stereo fader
source position to a Pre Fader stereo signal source.

EQ pre switch

Selects the Pre Fader signal source between its normal Post EQ stereo
source position to a Pre EQ stereo signal source.

dual level control

Controls the amount of Left and Right signal feeding the dual direct out-
put connectors when the Mode switch is NOT depressed. When the
Mode switch IS depressed, this level control will feed the
Balance/Assignment section of the module in place of the normal post
fader signal.

push–on/push–off

Located on the inside control of the dual concentric level control pot,it
turns this section on and off with its status displayed by the dual color
LED next to this control.

hidden functions

When the Mode switch is depressed, the Direct Output signal source is
determined by internal jumpers. (Post Fader - Pre Fader - Pre EQ) An
additional jumper determines whether or not the Pre Fader signals are or
controlled by the module’s mute system.
stereo input module
p. 10