mono input module
group assignment features
discrete group assignment switches 1–8
Assignment of post fader signal to discrete group buses unless the pan switch is activated, in which case the signal is post pan pot. When the mode switch within the Direct Output section is depressed, the signal source disconnects from the channel’s main fader and instead obtains its signal from the set of controls located above the assignment section.
pan–switch
Configures the discrete bus assignment switches to follow the pan control with left assigned to odd and right assigned to even mix buses.
mono assignment switch
Direct assignment of channel to mono mix bus.Normal signal source from post fader. (When the mode switch depressed, the signal is sourced from section above assignment area of console).
left/right assignment switch
Assigns post pan pot signals to left and right mix buses. (When the Mode switch is depressed, the signal is sourced from section above assignment area of console).
LCR switch
Reconfigures pan pot to LCR operation,requires the M and LR assignment switches to also be selected. LCR operaton does not affect the pan to group buses
pan control
Adjust panoramic image between the Left and Right outputs (Including groups when pan on is selected) When LCR is selected, provides true LCR panning between Left and Center and Center and Right buses. Signal to pan is selected by Mode Switch as normal post fader signal or, when switch is depressed, as a post direct level control source (Monitor Mode).
p. 3
