Peavey manual Xr Specifications, Input Specifications, XR 696 Output Specifications, Gain

XR® 696

SPECIFICATIONS:

Input Specifications:

Function	Input Z	Input Gains		Input Levels			Bal/	Connector
	(Ohms)	Control	Min**		Nominal*	Max	Unbal.
	Min	Setting
Lo-Z	2 k	Max w/o pad	-60 dBu		-30 dBu	-11 dBu	Bal.	XLR: Pin 1 Gnd,
(150 Ohms)		(50 dB)						Pin 2 (+), Pin 3 (-)
Channels 1-8		Max. w/ pad	-35 dBu		-5 dBu	+13.5 dBu
		(25 dB)
Hi-Z	100 k	Max w/o pad	-60 dBu		-30 dBu	-12 dBu	Bal.	1/4" TRS: Tip (+),
		(50 dB)						Ring (-),
								Sleeve Ground
Channels 1-4		Max w/ pad	-35 dBu		-5 dBu	+12.5 dBu
		(25 dB)
Line Input	22 k	Max. w/o pad	-28 dBu		+2 dBu	+21 dBu	Unbal.	1/4" TRS: Tip (+),
		(30 dB)						Ring (-),
Channels 5-8		Max. w/ pad	-3 dBu		+27 dBu	+46 dBu		Sleeve Ground
		(5 dB)
Tape	20 k	Max. Gain	-28 dBu		+2 dBu	+21 dBu	Unbal.	RCA Jacks
Channel 9		(30 dB)

0 dBV=1V (RMS) open load or 0 dBVu = .775 V (RMS)

**Min input level (sensitivity) is the smallest signal that will produce nominal output (2 dBu) with channel and master level controls set for maximum gain.

*Nominal settings are defined as all controls set a 0 dB (or 50% rotation for rotary pots)

XR 696 Output Specifications:

Function	Minimum Load Z	Output Level		Bal./Unbal.	Connector
	(Ohms)
		Nominal	Max.
Main L/R	600	+2 dBu	+21 dbu	Unbal.	1/4" Phono Tip (+),
					Sleeve Ground
Monitor	600	+2 dBu	+21 dBu	Unbal.	1/4" Phono Tip (+),
					Sleeve Ground
Tape	10 k	-10 dBu	+10 dBu	Unbal.	RCA
+2 dBu = 0 dBV = 1V (RMS)
Gain:
Mic Input to L and R Output			60 dB (Max. Gain)
Hi-Z Input to L and R Output			60 dB (Max. Gain)
Line Input to L and R Output			30 dB (Max. Gain)

13