Peavey XR 696 manual Frequency Response

Frequency Response:
Mic Input to L - R Output	20 Hz - 20 kHz +0 dB/-1 dB
Line Input to L - R Output	20 Hz - 20 kHz +0 dB/-1 dB
To Power Amplifier Output	20 Hz - 20 kHz +0 dB/-1 dB

Total Harmonic Distortion (THD):

<0.01% 20 Hz - 20 kHz mic input to L/R Mon. output at nominal level (20 Hz - 80 kHz BW)

<0.01% 20 Hz - 20 kHz line input to L/R output at output at nominal level (20 Hz - 80 kHz BW)

<.005% Typical at 1 kHz

Graphic Equalizer:
Filter Bandwidth	1 octave
Filter Frequencies	63, 125, 250, 500, 1 k, 2 k, 4 k, 8 k, 16 k
Maximum Boost and Cut	+12 dB Boost, -12 dB Cut

XR® 696 Hum and Noise:

Output	Residual Noise	S/N Ratio	Test Conditions
	Ref: 0 dBu	Ref: 2 dBu
Main Left	-98 dBu	-100 dB	All controls down
and Right
	-89 dBu	-91 dB	One channel nominal, master
			nominal
	-81 dBu	-83 dB	Master level nominal,
			Channel level nominal, Mic
			inputs terminated @ 150 Ohms
Monitor	-96 dBu	-98 dB	All controls down
	-90 dBu	-92 dB	One channel nominal, master
			nominal
	-81 dBu	-83 dB	Master level nominal,
			Channel level nominal, Mic
			inputs terminated @ 150 Ohms

(Hum and noise measurements: 22 Hz to 22 kHz BW)

S/N Ratio:

> 85 dB below rated output (500 W/channel), mic/line to speaker output

Equivalent Input Noise (EIN):

-121.5 dBu (Input terminated with 150 Ohms)

Crosstalk:

>80 dB adjacent input channels (20 Hz - 20 kHz)

>70 dB left to right outputs (20 Hz - 20 kHz)

Common Mode Rejection Ratio (Mic Input): 50 dB min. (20 Hz - 20 kHz)

60 dB typical @ 1 kHz

14