Cable Management
8 | NOTE: Make sure cables have enough slack to |
allow full movement of the arm. |
Run power cable through top or bottom of arm (A) and signal cable(s) through other side of arm in order to avoid interference with the signal. Lock cables into place by snapping cable covers (J & K) onto mount as shown. Display may have to be moved for easy access.
Optional: If additional cable management is required route cable ties (G) through slots of arm (A) as shown in detail 3.
9 | Snap wall plate covers (F) to top and bottom of wall |
plate rails as shown. |
J 
K
A
SLOT
G CABLE
DETAIL 3
WALL PLATE RAILS 
F
16 of 70 | ISSUED: |
