Peerless Industries SA771PU manual Installing Adapter Brackets to Display, Fixed STOP-POSTION #4

Installing Adapter Brackets to Display

NOTE: If display has a VESA 400 horizontal mounting pattern, skip to step 3-4 or 3-5 on page 11.

NOTE: For VESA 200x200 or VESA 200x100 mount hole patterns, skip to step 4 on page 12.

NOTE: For dedicated PLP plate installation skip to step 5 on page 14.

3-1	Remove four 1/4-20 x .6" screws using 5 mm allen
	wrench (I) and loosen two 1/4-20 x 1.25" screws

1/2 turn to allow for display bracket adjustment.

1/4-20 x 1.25" SCREWS

1/4-20 x .06" SCREWS

3-2	To prevent scratching the display, set a cloth on a flat, level surface that will support the weight of the display.
	Place display face side down and refer to display manufacturers instructions for removing obstructions from the

back of the display. Adjust display brackets to align with display mounting holes.

Measure horizontal mounting hole pattern and choose fixed stop-position from chart below.

horizontal mounting hole pattern	fixed stop-position
10-3/4" - 16-1/16" (273 - 408 mm)	#1	FIXED STOP-POSTION #4
15-1/16" - 21-9/16" (383 - 548 mm)	#2
		FIXED STOP-POSTION #3
20-7/16" - 27-9/16" (519 - 700 mm)	#3
26-1/16" - 32-9/16" (661 - 827 mm)	#4	FIXED STOP-POSTION #2

FIXED STOP-POSTION #1

9 of 70 ISSUED: 10-30-09 SHEET #: 095-9299-11 03-22-12