WARNING
•Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely handle placement of the display.
•Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten M10 x 15 mm screws (E) to 40 in. • lb (4.52 N.M.) maximum torque.
Mounting Flat Panel Display
For Dedicated PLP Plate (not evaluated by UL):
5 Refer to PLP model instruction sheet for attachment of dedicated PLP plate to display.
Install two M10 x 15 mm screws (provided with dedicated PLP plate) into top two holes of dedicated PLP plate leaving 1/4" of exposed thread as shown in figure 5.1.
DEDICATED PLP PLATE
1/4"
M10 X 15 MM
SCREW
A
For Universal Adapter Bracket: Hook M10 x 15 mm screws into keyslots of wall arm adapter plate (A) as shown figure 5.2.
B
DISPLAY NOT SHOWN | 1/4" |
FOR CLARITY |
|
A
| ADAPTER PLATE |
| fig. 5.2 |
| ADAPTER PLATE |
| fig. 5.1 |
Insert two M10 x 15 mm screws (E) into bottom holes of adapter plate as shown in figure 5.3 or 5.4. Tighten all | |
| fasteners with 6 mm allen wrench (H). |
DEDICATED PLP PLATE
ADAPTER PLATE
fig. 5.3 E
B
ADAPTER
PLATE
E
fig. 5.4
14 of 70 | ISSUED: |
