Peerless Industries SA771PU manual Arm Tension Adjustment, Tension Screw Tension Screws

Arm Tension Adjustment

WARNING

•Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the display to fall.

•If screws become loose over time, tighten screws as necessary. Tighten screws to 50 in • lbs (5.6 N.m.) maximum torque.

10 If more or less tension is desired in the arm pivot points, do the following:

•To increase tension, turn socket screw clockwise with 5 mm allen wrench (I). NOTE: Tighten screws to 50 in • lbs (5.6 N.m.) maximum torque.

•To reduce tension, turn socket screw counter-clockwise with 5 mm allen wrench (I). NOTE: Do not turn more than half a turn.

TENSION SCREW

TENSION SCREWS

17 of 70 ISSUED: 10-30-09 SHEET #: 095-9299-11 03-22-12

© 2012, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.