ECE R44/03, for children weighing from 0 - 13 kg (0 - 12/14 months of age). Suitable for general use in vehicles. Designed for use with most--but not all--vehicle seats.

The child safety car seat can be correctly installed if the user's manual for the vehicle states that the vehicle conforms to the "Universal" requirements for Group 0+ child car seats.

The "Primo Viaggio" car seat has been classified "Universal" according to stricter inspection criteria than the criteria used for previous models that do not carry a safety inspection label.

The child safety car seat may be used only on approved vehicles that are equipped with three- point stationary or wrap-around belts that have been inspected in conformity with the UN/ECE Regulation No. 16 or equivalent regulations.

When in doubt, consult the "Primo Viaggio" car seat manufacturer or retailer.

Make sure that the three-point safety belt on the vehicle, which is used to fasten the base and the child car seat to the vehicle, is always taut and never twisted.

In the case of accidents where the child car seat and the three-point safety belt on the vehicle are subjected to extreme stress, we recommend replacing the child car seat and the three-point safety belt with new ones.

Adjust the child car seat safety belt, making sure that the strap between the legs is taut, and that it fits snuggly against the child's body without being too tight.

Rigorously follow all instructions supplied by the child restraint system manufacturer.

Be especially careful not to position baggage in the car in such a way that it may cause injury to the child in the car seat in case of accident.

Never use the car seat without its cloth lining. Do not replace the lining with another lining that has not been approved by the manufacturer. The lining is an important part of the car seat.

HOW TO INTERPRET THE INSPECTION LABEL

This paragraph explains how to interpret the inspection label (orange label).

The manufacturer's trademark and the name of the product are shown at the top of the label.

The word "UNIVERSAL" indicates that the child safety car seat can be used on approved vehicles equipped with three-point stationary or wrap-around belts which have been inspected in conformity with UN/ ECE Regulation No. 16 or equivalent regulations.

The letter "E" inside a circle is a European inspection

label. The number indicates the country that approved inspection. (1 - Germany, 2 - France, 3

- Italy, 4 - The Netherlands, 11 - Great Britain, and 13 - Luxembourg).

The certification number is listed below. Numbers beginning with 03 pertain to the third amendment of Law R44.

Each car seat is personalized with a progressive production number upon inspection. Each child car seat can be identified by its inspection number.

The last line states the safety regulation number: ECE R44/03.

Page 16
Image 16
Peg-Perego Base Fissa manual HOW to Interpret the Inspection Label