AUTO-FOCUS MODE

(This section applies to Spectra II™ only.)

There are two auto-focus modes: auto and off.

If auto focus is in the auto mode, pressing the Focus Far or Focus Near button will place the focus in the manual mode. The dome will return to auto focus if you pan or tilt the unit or do a zoom function.

If the mode is set to off, the dome will operate in the manual mode with one exception. If you issue a command to go to a preset, auto focus will turn on and remain on until you press the Focus Far or Focus Near button.

To change the mode:

1.Program preset 95 (28 if in 32-preset mode; refer to the Preset Functions section) to access the main menu (refer to the Main Menu Access section). The main menu will appear.

2.If the cursor (>) is not beside Camera, move the joystick up or down to position the cursor beside Camera.

3.Press the Iris Open button to enter the Camera submenu.

4.Move the joystick up or down to position the cursor beside Next.

5.Press the Iris Open button to go to the next camera menu.

6.Move the joystick up or down to position the cursor beside Auto-Focus Mode.

7.Press the Iris Open button on your keyboard. A star will appear beside Auto-Focus Mode and the cursor will move to the right beside the word Auto or Off.

8.Move the joystick up or down to toggle between Auto and Off.

9.SELECT - Press the Iris Open button on your keyboard to select your choice. CANCEL - Press the Iris Close button if you do not want to change the setting.

SHARPNESS

There are two modes for adjusting the sharpness of the picture: automatic and manual.

To change the mode:

1.Program preset 95 (28 if in 32-preset mode; refer to the Preset Functions section) to access the main menu (refer to the Main Menu Access section). The main menu will appear.

2.If the cursor (>) is not beside Camera, move the joystick up or down to position the cursor beside Camera.

3.Press the Iris Open button to enter the Camera submenu.

4.Move the joystick up or down to position the cursor beside Next.

5.Press the Iris Open button to go to the next camera menu.

6.Move the joystick up or down to position the cursor beside Sharpness.

7.Press the Iris Open button. Another menu will appear with the auto sharpness and sharpness selections.

8.Move the joystick up or down to position the cursor beside one of the choices. Press the Iris Open button.

34

Pelco Manual C1487M-C (7/99)

Page 34
Image 34
Pelco c1487-c operation manual AUTO-FOCUS Mode, Sharpness