WALL MOUNTING
You can mount one NET5301T-I to a wall using the optional WM5001-4U wall mount base kit.
WARNING: Do not use any WM5001-4UEXP expansion units when mounting the NET5301T-I to a wall. Otherwise, the units may overheat. To mount the NET5301T-I to a wall using the WM5001-4U:
1.Install the WM5001-4U wall mount base kit; refer to the WM5000 Series Wall Mount Kit Installation manual (C1616M).
2.Insert the NET5301T-I into the wall mount. Make sure all front and rear panel connectors are accessible.
Figure 6. NET5301T-I and WM5001-4U Wall Mount
3. Tighten the thumbscrew on the wall mount to secure the unit (refer to Figure 7).
TIGHTEN
THUMBSCREW
Figure 7. Tighten the Thumbscrew to Secure the Unit