Pelco C603M-A (11/07) manual Connecting A Relay Device, Setting, Options, Default

Refer to Table C when installing the PTZ device. It lists the serial port settings that the NET5301T-I supports.

Table C. Serial Port Options and Defaults

Setting	Options	Default
Data rate	110, 300, 1200, 2400, 4800, 9600, 19200, 38400,	2400
(bits per second)	57600, 115200, 230400
Data bits	5, 6, 7, 8	8
Parity	None, Odd, Even	None
Stop bits	1, 2	1

CONNECTING A RELAY DEVICE

The NET5301T-I has an output for triggering an external device. It supports both momentary and continuous relay operation.

You can operate the relay interactively, during an active connection, or automatically to coincide with certain events. Typical applications include activating a door, gate or lock, or switching on lights or other electrical devices.

WARNING: Do not exceed the maximum rating of 30 VDC, 1 A.

Figure 16 shows how to wire the relay with its power source to the video encoder (refer to Table B on page 19 for the specific connector pin assignments).

LOAD:

EXTERNAL LIGHT/SIREN

FUSE

NORMALLY	COMMON (C)
OPEN (NO)

POWER

MAX 30 VDC, 1 A

Figure 16. Connecting a Relay Device

C603M-A (11/07) 21