Pelco dx8100-exp installation manual C2636M 11/06

6.Ensure that the DX8100 Series DVR and all of its components are protected against electrostatic discharge (ESD). Before handling any electronic components, you should take steps to ground yourself properly so that any built-up static electric charges are dissipated away from the unit. The most effective method for combating ESD is to use a properly grounded wrist strap.

NOTE: If you do not have access to a grounded wrist strap, you can discharge any built-up static by periodically touching an unpainted section of the chassis.

Figure 5. ESD Protection

7.Install the Expansion Unit PC cards and cabling.

8.Connect the Expansion Unit to the DX8100.

9.Start the DX8100 and verify that you have access to the additional features/functions that are supported by the Expansion Unit.

C2636M (11/06) 7