C2694M (7/08) 23
Configuring the Endura Gateway
The Endura gateway requires separate configuration apart from the Endura system. Only users who have been assigned the role Administrator
can perform configuration tasks.

LOGGING ON TO THE WEB CLIENT FOR THE FIRST TIME

The Web client can be opened in either the 32-bit or 64-bit version of Internet Explorer. Microsoft ActiveX® is required to view video in the Web
client. However, ActiveX cannot be installed in the 64-bit version of the browser. If you have a computer that includes both versions of Internet
Explorer, always use the 32-bit version when working in the Web client.
1. Start the Web client in either of the following ways:
• Double-click the Web client icon on the desktop of your workstation or computer.
• Start the Web browser, and then enter the URL provided by your system administrator.
2. At the Login screen, enter the default user name and password provided with the system. The default user name provides administrator
access to the gateway so that you can configure the system and create additional users. For system security, change the password for the
default user, and then record your new information in a secure location. User names and passwords are case sensitive.
Figure 19. Login Screen
3. Select Local Login to gain access to the setup screens.
4. Click Connect (or press the Enter key).
5. Click the Setup button on the Video page.
6. Follow the instructions in the rest of this section to set up the Web client.

ENTERING THE PUBLIC NETWORK INTERFACE HOST INFORMATION

The gateway uses a network address to communicate with the Endura network. The gateway is shipped from the factory with a default address
of 192.168.100.2.
1. From the Setup page, select Public Network Interface.
2. Enter or select the appropriate information for your WAN site (refer to Figure17 on page21):
•Host Name
•Video Base Port: The beginning port number for a range of real-time transport protocol ports.
•DHCP: By default, DHCP is turned off.
•IP Address: The default IP addr ess for the GW5000 is 192.168.100.2.
• Subnet Mask
•Gateway: The default address for the gateway on the GW5000 is also 192.168.100.2.
•DNS Server IP: Enter one or more DNS server IP address if you use them; each IP address should be entered on a separate line.
3. Click Apply to save the new information.