INTRODUCTION
The CP-1000 is an electronic control system which is designed to coordinate and operate all of the equipment
associated with your spa or swimming pool.
The system is comprised of two principal components: the CP-1000 CONTROLLER which is located inside your
house, and the LX-1000 POWER CENTER which is located at the pool equipment pad.
The Controller automatically controls and monitors water temperature and the timing of all the pool equipment.
The Power Center provides easy maintenance for your Pool Serviceperson.
Additionally, the CP-1000 incorporates important safety features which protect your pool equipment from
accidental damage.
Your system may also include additional Remote Controls, solar heating, and special options which further add to
the convenience, safety, and economy of operating your spa or swimming pool.
SAFETY FEATURES

HEATER PROTECTION:

A built-in electronic delay circuit automatically runs the filter pump for an additional four minutes whenever the
system is turned off. This feature enables the heater to cool down, so that the heat exchanger and plumbing are
not damaged from overheating.
For testing and servicing purposes, it is possible to override this delay circuit by pushing the DELAY
CANCEL Button at the CP-1000 Controller.

POOL CLEANER PROTECTION:

If your system incorporates a pool cleaner pump, it will have been plumbed downstream of the filter pump.
This arrangement requires that the filter pump be running whenever the pool cleaner is on.
The CP-1000 incorporates the following protection features against possible pump damage if there is no water
circulation:
1. The filter pump will automatically be activated whenever the pool cleaner is running, even if the filter has not
been switched on.
2.
Additionally, whenever the pool cleaner is turned on, a built-in electronic delay circuit will prevent it from
running until
4
minutes have passed. This prevents the pump from possible damage caused by air which may
have entered the plumbing since the system was last used.
For testing and servicing purposes, it is possible to override this delay circuit by pushing the DELAY
CANCEL Button at the CP-1000 Controller.
3.
If your system incorporates solar, the pool cleaner will automatically be disabled for a period of
4
minutes
whenever the solar system turns on. This protects the pool cleaner from possible damage caused by residual
air within the solar panels.

BATTERY BACK-UP:

In case of a power failure, a long-life battery automatically maintains the program and clock functions of your
Control System. This safeguards against the equipment operating erratically, once power has been restored, and
also eliminates the need to reprogram whenever there is a power failure.