Pentair CP-1000 EQUIPMENT CONTROL , SETTING THE CLOCK

EQUIPMENT CONTROL

In Time Mode (normal operation), the Clock will display the actual time of day, and "TIME" will appear on the right

of the Display.

It is possible to manually activate the pool equipment while Clock is in Time Mode, by simply pushing the

appropriate Equipment Button. This will temporarily override any preset program which may be in effect.

In order to preselect daily equipment operation, the Clock must be switched to Program Mode.

To achieve this, push PROGRAM Button once. Whenever Clock is in Program Mode, "PROG" will appear on the

right of the Display.

After programming is complete, the Clock will automatically return to Time Mode.

SETTING THE CLOCK

If the Clock is not already in Time Mode, push PROGRAM Button until "TIME" appears on the right of the Display.

This indicates that the

Push the HOURS and

day is displayed.

Pay special attention

clock is now in ~ime Mode.

MINUTES Buttons until the

to the AM/PM indicator.

correct time of