Pentax 12195, 12161 specifications ShootingFunctions

98

4 ShootingFunctions

•By default, you cannot adjust the focus with the remote control unit. Focus on the subject first with the camera before operating with the remote control unit. When [9. AF with Remote Control] is set to [On] in the [ACustom Setting 2] menu, you can use the remote control unit to adjust the focus.

•Select a mode other than h, i or i in the Drive Mode setting screen to cancel the remote control shooting. The setting is canceled when the camera is turned off if [Drive Mode] is set to P(Off) in [Memory] of the [ARec. Mode 3] menu. (p.189)

•The Shake Reduction function is automatically turned off when h, i or i is set.

•The remote control shooting may not be available in backlit conditions.

•When using the Remote Control Waterproof O-RC1, the autofocus system can be operated with the Sbutton. The {button cannot be used.

•The Remote Control F can send a remote control signal about 30,000 times. Contact a PENTAX Service Center to replace the battery (this will involve a fee).