Pentax 12195, 12161 specifications 226

226

11

Appendix

Error Messages	Description
Not enough battery	Appears when trying to update the firmware if the
	battery level is insufficient. Install a fully charged
power remaining to
	battery, or use the AC adapter kit (optional).
update the firmware
	(p.40)
Unable to update firmware.	Unable to update the firmware. The update file is
There is a problem with the	damaged. Try downloading the update file again.
firmware update file	(p.191)
	The maximum folder number (999) and file
Image folder cannot be	number (9999) are being used, and no more
created	images can be saved. Insert a new SD Memory
	Card or format the card. (p.193)
Unable to store image	The image could not be saved because of an SD
	Memory Card error.
	The DPOF settings could not be saved because
Settings not stored	SD Memory Card is full. Delete unwanted images
	and perform DPOF setting again. (p.158)
The operation could not be	The camera was unable to measure the manual
	white balance (p.122) or use HDR Capture
completed correctly
	(p.125). Try the operation again.
No more images can be	You cannot select more than the maximum
	number of images for Index (p.153) and Select &
selected
	Delete (p.158).
	There are no images that can be processed
No image can be processed	using Digital Filter (p.168) or RAW Development
	(p.174) function.
	Appears when you try to perform Resize (p.166),
	Cropping (p.167), Digital Filter (p.168), Red-eye
This image cannot be	Edit (p.173) or RAW Development (p.174) for
processed	images captured with other cameras, or when
	you try to perform Resize or Cropping for
	minimum file size images.
The camera failed to create	The creation of an index print image failed.
an image	(p.153)
This function is not available	You are trying to set a function that is not
in the current mode	available when the capture mode is set to n
	(Auto Picture), H(Scene) or C (Movie) mode.
The camera will turn off	The camera will turn off because its internal
	temperature gets too hot. Leave the camera
to prevent damage from
	turned off until it has had time to cool down
overheating
	before turning on the camera again.