Pentax 12195, 12161 specifications Press the shutter release button halfway

94

4 Press the shutter release button halfway.

kappears on the monitor and the Shake Reduction function is activated.

1/2000 F2.8 1600 [ 37]

4 ShootingFunctions

Be sure to turn the Shake Reduction function off when using the camera with a tripod.

•You can also change the setting from the [A Rec. Mode 3] menu.

•[Shake Reduction] is fixed to R in the following situations.

-Self-timer shooting

-Remote Control shooting

-when the shutter speed is set to h

•[Shake Reduction] is fixed to Q when the capture mode is set to Z(Night Scene HDR) or p(HDR) of H(Scene) mode.

•You can select whether to use the Shake Reduction function only when taking pictures or during standby mode as well with [4. Shake Reduction Options] from the [A Custom Setting 1] menu.

•The Shake Reduction function will not fully work (for about 2 seconds) right after turning on the camera or restoring from Auto Power Off. Wait for the Shake Reduction function to work stably and properly, and then press the shutter release button gently.

•The Shake Reduction function is available with any PENTAX Q-mount lens compatible with this camera. However, manually set the focal length in cases where the focal length cannot be automatically obtained, such as when a mount adapter is being used. Refer to “Using a K-Mount Lens” (p.223) for details.