Pentax 12195, 12161 Setting the Video/HDMI Output Format, 162, Selecting the Video Output Format

162

3 Connect the other end of the cable to the video input terminal on the AV device.

4 Turn the AV device and camera on.

The camera turns on in video mode or HDMI mode, and the camera information is displayed on the screen of the connected AV device.

When using the video output, images are output at normal resolution regardless of the resolution supported by the AV device. To output HD video, use the HDMI output or transfer to and play back on a computer.

6 PlaybackFunctions

Setting the Video/HDMI Output Format

Set the video/HDMI output format according to the connected terminal. Normally, the default output format setting does not have to be changed. However, if it fails to play back images properly, change the output format setting.

To change the setting, remove the cable first before proceeding.

Selecting the Video Output Format

When the hometown is set at the time of initial setting (p.47), the video output format is also set in accordance with that region. Depending on the country or region, images may fail to be played back with the set video output format. If this happens, change the video output format setting.

1 Select [Video Out] in the [RSet-up 2] menu, and press the four-way controller (5).

2 Use the four-way controller (23) to select [NTSC] or [PAL], and press the 4button.

3 Press the 3button.

The screen that was displayed before selecting the menu appears again.