Pentax 12161 Use the four-way controller 45 to select the white balance, Four-way controller

2

Use the four-way controller (45) to select the white balance.

When J (Fluorescent Light) is selected, press the four-way controller (3) and use the four-way controller (45) to select D, N, W, or L.

Proceed to Step 6 if you do not need to change the parameters.

Auto White Balance

MENU Cancel WB± OK OK

121

3

4

5

6

Press the mc button.

The fine-tuning screen appears.

Fine-tune the white balance.

		G3	A2
		SHUTTER Adjust
		MENU Cancel		±0	OK OK
Available operations
Four-way controller	Adjusts the tone of the colors between green (G) and
(23)	magenta (M).
Four-way controller	Adjusts the tone of the colors between blue (B) and
(45)	amber (A).
d/i button	Resets the adjustment value.

Press the 4button.

The screen that was displayed in Step 2 appears again.

Press the 4button.

The camera is ready to take a picture.

Because the light source changes when a flash discharges, you can set the white balance for when the flash discharges. Select [Auto White Balance], [Unchanged] or [Flash] in [5. WB When Using Flash] of the [ACustom Setting 1] menu.

5 ShootingSettings