Pentax 12161 127, To select an image Finishing tone, Change the parameters, Contrast -4 to +4

I

The screen to select a parameter appears.

Press the mc button.

4

5 Use the four-way controller (23) to choose a parameter you want to change.

You can check the selected Custom Image effect with the background image.

127

2 Use the four way controller (2345) to select [Custom Image], and press the 4button.

The Custom Image setting screen appears.

The last image taken after the camera was turned on is displayed in the background.

3
	Use the four-way controller
		Bright
	(2345) to select an image
	finishing tone.

Proceed to Step 8 if you do not need to		Parameter Adj.
	MENU Cancel		OK OK

change the parameters.

Saturation

MENU Cancel OK OK

The following parameters can be changed according to the selected image finishing tone.

Image Tone	Parameter
	Saturation: -4 to +4
Bright/Natural/Portrait/	Hue: -4 to +4
	High/Low Key Adj: -4 to +4
Landscape/Vibrant/Radiant
	Contrast: -4 to +4
	Sharpness/Fine Sharpness: -4 to +4

5 ShootingSettings