Setting the Eye-Fi CommunicationYou can automatically transfer images or movies to a computer or similar devices via wireless LAN using a commercially available Eye-Fi card. For details on transferring images, refer to “Transferring Images Using an Eye-Fi Card” (p.218). The default setting is P(Off).
1 | | |
Use the four-way controller (23) to select [Eye-Fi] on the |
2 | | [WSetting] menu. |
| |
| Use the four-way controller (45) to select O(On) or P (Off). |
| | O (On) | Turns on communication using an Eye-Fi card |
3 | | P (Off) | Turns off communication using an Eye-Fi card |
| |
| Press the 4button. |
The setting is saved.
To establish an Eye-Fi communication, you first have to specify a wireless LAN access point and transfer destination on the Eye-Fi card. For details on how to set up the card, refer to the operating manual supplied with the Eye- Fi card.
Adjusting the Brightness of the DisplayYou can adjust the brightness of the display to 7 levels.
1 Use the four-way controller (23) to select [Brightness Level] on the [WSetting] menu.
2 Use the four-way controller (45) to adjust the brightness.
FDark
GNormal
HBright
