7 Settings

Perform Pixel Mapping

Pixel Mapping is a function for mapping out and correcting for defective pixels in the CCD sensor. Run the Pixel Mapping function if image dots always seem to be defective in the same place.

• Pixel Mapping is only accessible from A mode. Pixel Mapping cannot be selected even if the [WSetting] menu is displayed by pressing the 3 button in Q mode.

•When executing Pixel Mapping from Q mode, press the Q button once to enter Amode. Then press the 3button and the four-way controller (5) to display the [WSetting] menu and select Pixel Mapping.

•Pixel Mapping cannot be selected in O (Voice Recording) mode.

1Use the four-way controller (23) to select [Pixel Mapping] on the [WSetting] menu.

2Press the four-way controller (5).

The [Pixel Mapping] screen appears.

3 Use the four-way controller (2) to

Pixel Mapping

select [Pixel Mapping].Checks the image sensor

and corrects defective

pixels

Pixel Mapping

Cancel

OK OK

4 Press the 4button.

Defective pixels are mapped and corrected.

When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC117 (optional) or use a battery with ample capacity remaining.

192