Changing the Start-up Screen

You can choose the start-up screen displayed when the camera is turned on. You can choose any of the following images as the start-up screen:

•The Guide Display Start-up Screen showing a guide for the shooting modes and buttons

•One of the 3 pre-installed screens

•One of your own images (compatible images only)

1Use the four-way controller (2345) to select ^(Start-up Screen) from the Playback Mode Palette.

2Press the 4button.

The image selection screen appears.

3

 

 

 

 

 

 

Use the four-way controller (45)

 

 

 

 

 

 

 

 

100-0017

 

 

to choose the image for the start-

 

 

 

 

 

 

 

 

 

 

 

up screen.

 

 

 

 

 

 

Only images available for the start-up

 

 

 

 

 

 

screen are displayed. You can also choose

 

 

 

 

 

 

one of the 3 pre-installed screens or the

 

MENU Cancel

OK OK

 

 

Guide Display Start-up Screen already

 

 

 

 

 

 

 

 

stored in the camera.

4 Press the 4button.

The setting is saved.

•Once the start-up screen has been set, it will not be deleted even if the original image is deleted or the SD Memory Card or built-in memory is formatted. However the image is deleted if you change the start-up screen after deleting the recorded image or formatting the memory.

•The start-up screen is not displayed when set to [Off].

•The start-up screen is not displayed when you turn the camera on in playback mode.

•Movies or images taken at F (Digital Panorama) mode cannot be used for the start-up screen.

7 Settings

193