• With j, you can continue shooting until the memory capacity of the SD Memory Card or built-in memory is full.

•The interval of j varies according to the [Recorded Pixels] and [Quality Level] settings.

•The focus, exposure and white balance are locked with the first shot.

•When the Face Detection function is activated (p.69), it works only when taking the first shot.

•The Blink Detection function works only for the last shot.

•The number of recorded pixels is fixed at f/ in cmode. When the

shooting mode is set to (Report), the number of recorded pixels is set to V.

Taking Pictures Using the Remote Control Unit (Optional)

You can use the remote control (optional) to take pictures while you are away from the camera.

i

The shutter will be released after about three seconds when the shutter release

button on the remote control unit is pressed.

h

The shutter will be released immediately when the shutter release button on

the remote control unit is pressed.

1

 

Press the four-way controller (2) in Amode.

2

The [Drive Mode] screen appears.

 

Use the four-way controller (45) to select i and press the

 

four-way controller (3).

3 TakingPictures

3 Use the four-way controller (45) to select i or h and press the

4button.

The self-timer lamp begins to blink slowly and the camera is ready to take a picture with the remote control.

When the camera detects a person’s face, the Face Detection function is activated and the face detection frame appears (p.69).

Drive Mode

Remote Control

MENU Cancel

OK OK

83