Instant Review and Blink Detection

The image appears on the display temporarily (Instant Review) immediately after it is captured. If the camera detects that the subject’s eyes are closed while Face Detection (p.69) is activated, the message [Closed eyes have been detected] appears for 3 seconds (Blink Detection).

• When the Face Detection function does not work, Blink Detection also does not function. Even if the subject’s faces are recognized, Blink Detection may not function depending on the condition of the recognized faces.

• You can also disable the Blink Detection function (p.104).

Using the Zoom

You can use the zoom to change the captured area.

 

 

W/T button

 

 

Four-way controller

 

 

4 button

 

 

3button

1

Press the W/T button in Amode.

Zoom ratio

 

W Wide (left)

Zoom bar

 

Widens the area that is captured

 

 

 

by the camera.

36

 

T Tele (right)

 

 

 

Enlarges the subject.

 

 

If you continue to press T, the camera

 

 

automatically switches from optical zoom to

 

 

Intelligent Zoom and stops at the point where

38

 

the zoom switches to digital zoom.

 

Once the button is released and pressed again, the camera switches to digital zoom.

If the digital zoom is set to off on the menu, the optical zoom and the Intelligent Zoom ranges are available for use. The zoom ratio of the Intelligent Zoom changes depending on the number of recorded pixels.

The zoom bar is displayed as follows.

3 TakingPictures

63