5 Press the 4button.

The frame appears on the display.

When the camera detects a person’s face, the Face Detection function is activated and the face detection frame appears (p.69).

At shipment, the camera includes 3 default frames for each aspect ratio (4:3 and 16:9).

Optional Frames

The optional frames are stored in the CD-ROM supplied with the camera. To use these frames, copy them from the CD-ROM (p.155). These optional frames are deleted if the files on the built-in memory are deleted with a computer or if the builtin memory is formatted.

Adding a Frame to a captured image 1p.153

Taking Pictures at a Set Interval (Interval Shot)

In this mode, a set number of pictures can be taken automatically at a set interval from a set time.

 

 

Set the camera to take pictures at intervals. The

Interval

10 sec. – 99 min.

intervals can be set in increments of one second from

ten seconds to 4 minutes, or in 1 minute increments

 

 

from 4 to 99 minutes. You cannot set the camera to

 

 

take interval shots at less than ten seconds.

Number

2 shots – number of

You can set this to up to 1000 shots. However, it

of Shots

recordable images

cannot exceed the number of recordable images.

 

 

You can set 1 minute increments for the first 59

Start Delay

0 min. – 24 hours

minutes and 1 hour increments from there. If the

start time is set to 0 minutes, the first picture is taken

 

 

 

 

as soon as the shutter release button is pressed.

 

 

 

1 Use the four-way controller (2345) to select (Interval

Shot) from the Capture Mode Palette.

2 Press the 4button.

The current interval shot settings appear for approximately 1 minute. To take pictures with the current settings, go to step 10.

3 Press the 4button while the settings are displayed.

The [Interval Shot] setting screen appears. [Interval] is marked with the frame.

3 TakingPictures

79