If the camera is subjected to rapid temperature changes, condensation may form on the inside and outside of the camera. Therefore put the camera in a bag or plastic bag and take the camera out when the difference in temperature has subsided.

Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops.

Please do not press forcefully on the display. This could cause it to break or malfunction.

Be careful not to sit down with the camera in your back pocket as this may damage the exterior of the camera or the display.

When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket on the camera.

Cleaning Your Camera

Do not clean the product with organic solvents such as thinner, alcohol or benzene.

Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning as it may damage the lens.

Storing Your Camera

Avoid storing the camera where pesticides and chemicals are handled. Remove the camera from its case and store it in a well-ventilated place to prevent the camera from becoming moldy during storage.

Avoid using or storing the camera where it may be exposed to static electricity or electrical interference.

Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.

Other Precautions

Periodic inspections are recommended every one to two years to maintain high performance.

Please note that deleting data, or formatting the SD Memory Cards or the built- in memory does not completely erase the original data. Deleted files can sometimes be recovered using commercially available software. It is user’s responsibility to ensure the privacy of such data.

6