If you accidentally select the wrong language and go to the next procedure, perform the following operation to set the language back.

When the Wrong Language Has Been Inadvertently Selected

1 Press the four-way controller (5).

2 Use the four-way controller (2345) to select the language and press the 4button.

The [Initial Setting] screen appears in the selected language.

When the Screen After Step 2 Appears in the Wrong Language

1 Press the 3button.

This exits the settings screen and returns the camera to capture mode.

2 Press the 3button.

The [ARec. Mode] menu appears.

3 Press the four-way controller (5) twice.

4 Use the four-way controller (32) to select [Language/ ]. 5 Press the four-way controller (5).

The [Language/] screen appears.

6 Use the four-way controller (2345) to select the language.

7 Press the 4button.

The [WSetting] menu appears in the selected language.

The language is now switched to your desired language. To reset [Hometown], [Date] and [Time], refer to the pages below for instructions.

•To change [Hometown], follow the steps in “Setting the World Time” (1p.180).

•To change the date and time, follow the steps in “Changing the Date and Time”

(1p.176).

The video output format (NTSC/PAL) is set to the format of the city selected in [Hometown] on the [Initial Setting] screen. See the following pages for information on the available video output formats and how to change the initial settings.

•Video output formats available initially: “List of World Time Cities” (1p.232)

•To change the video output format: “Changing the Video Output Format” (1p.187).

1 GettingStarted

45