Troubleshooting307

In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the battery out and putting them back in again. When the mirror remains in the up position, take the battery out and put them back in again. Then, turn the power on. The mirror will retract. After these procedures are done, if the camera operates correctly, it does not require any repairs.

We recommend checking the following items before contacting a service center.

Problem

Cause

Remedy

The camera

The battery is not

Check if a battery is installed. If not, install a

installed

charged battery.

does not

 

 

The battery power is

Replace with charged battery or use the AC

turn on

 

low

adapter kit K-AC50 (optional). (p.47)

 

The lens aperture

Set the lens aperture ring to the sposition

 

(p.95) or select [Permitted] in [37. Using

 

ring setting is other

 

Aperture Ring] in the [ACustom Setting 6]

 

than the sposition

The shutter

menu. (p.294)

 

 

 

The flash is charging

Wait until charging is finished.

does not

release

There is no available

Insert an SD Memory Card with available

 

space on the SD

space or delete unwanted images. (p.49,

 

Memory Card

p.79)

 

Recording

Wait until recording is finished.

 

 

 

 

 

Autofocus cannot focus well on subjects

 

 

that have low contrast (the sky, white walls),

 

 

dark colors, intricate designs, rapidly-

 

The subject is

moving objects or scenery shot through a

 

window or a net-like pattern. Lock focus on

 

difficult to focus on

 

another object located at the same distance

 

 

The

 

as your subject, then aim at target and press

 

the shutter release button fully.

autofocus

 

Alternatively, use manual focus. (p.126)

does not

 

 

 

Position the subject in the focus frame in the

work

 

 

middle of the viewfinder. If the subject is

 

The subject is not in

 

outside the focusing area, aim the camera

 

the focusing area

at the subject and lock the focus, then

 

 

compose a picture and press the shutter

 

 

release button fully. (p.124)

 

The subject is too

Move away from the subject and take a

 

close

picture.

10

Appendix